Stove & range repair in Owensboro, KY
A burner that won't light or a range that heats unevenly slows down every meal in the house. Our technicians repair gas and electric stoves and ranges from every major brand across Owensboro and Daviess County, including rural propane setups that need correctly matched burner orifices.
Smell gas near your range? Turn off the gas supply if you know how, ventilate the room, and call our emergency line right away.
Common stove and range problems we repair every week
Gas and electric ranges fail in different ways, but both show clear warning signs. Here's what Owensboro homeowners call us about most.
Burner won't light
Usually a weak igniter or a clogged burner port keeping the spark from reaching the gas.
Burner clicks continuously
A stuck or wet igniter switch often keeps clicking even after the burner has lit.
Electric coil not heating
Typically a burned-out surface element or a faulty infinite switch controlling it.
Uneven flame or heat
Can point to a clogged burner cap, low gas pressure, or the wrong orifice size for the fuel type.
Knobs loose or unresponsive
Worn knob stems or a failing gas valve behind the control panel are common causes.
Control panel not responding
Often a control board issue or a spill that has gotten into the electronic controls.
What makes Owensboro stoves and ranges act up
A meaningful number of homes outside Owensboro city limits run on propane rather than natural gas, and burners need the correct orifice size for the fuel in use. An uneven flame or a burner that won't stay lit after a move or an appliance swap is a common and often overlooked cause we check first on rural service calls.
In older homes across town, electric ranges installed on original circuits can see slightly lower voltage under load, which shows up as a burner that heats more slowly than it should. This is usually mistaken for a failing element when the wiring is actually the root cause.
- Propane vs. natural gas: rural Daviess County homes need correctly sized burner orifices for propane.
- Older home wiring: can cause electric coils to heat more slowly than they should.
- Grease and spill buildup: clogs burner ports and can damage control panels over time.
- DIY appliance swaps: installing a range without confirming fuel type is a common cause of ignition issues.
What stove and range repair typically costs in Owensboro
These ranges help you plan ahead. Your technician confirms the exact price after a short diagnostic, before any repair begins.
| Service | Typical price range |
|---|---|
| Igniter or ignition switch replacement | $90 – $160 |
| Electric surface element replacement | $80 – $150 |
| Spark module replacement | $120 – $210 |
| Gas valve replacement | $150 – $260 |
| Infinite switch replacement | $100 – $180 |
| Control board replacement | $220 – $380 |
Our diagnostic visit fee is applied toward the repair if you move forward the same day.
Your stove and range repair visit, step by step
Describe the problem
Tell us the brand, gas or electric, and what the range is doing. We'll give you a same-day window.
On-site diagnosis
Your technician checks igniters, elements, switches, and gas pressure to find the true cause.
Upfront price, your approval
You'll know the exact cost before any part is replaced.
90-day guarantee
If the same issue returns within 90 days, we come back and fix it again at no extra cost.
We service gas and electric ranges from every major brand
From a Whirlpool electric range to an LG or Samsung gas model, our technicians carry igniters, elements, and valves for the brands most common in Owensboro kitchens.
Questions Owensboro homeowners ask us most
This usually points to a weak igniter, a clogged burner port, or moisture on the igniter switch. Cleaning often helps, but a worn igniter needs to be replaced.
Igniter and switch repairs typically run $90 to $210. Gas valve or control board repairs usually fall between $150 and $380 depending on the issue.
A stuck or wet igniter switch is the most common cause. It usually needs to be cleaned or replaced to stop clicking once the flame is lit.
Yes. Burners need the correct orifice size for the fuel type in use. A range moved between a propane and natural gas home needs to be converted correctly to avoid uneven flames.
Yes. We service freestanding, slide-in, and drop-in ranges on both gas and electric models.
Get your stove or range cooking safely again today
Call now for same-day stove and range repair anywhere in Owensboro or Daviess County, backed by our 90-day guarantee.
(270) 228-9828